hi is there any way to specify source interface or Source IP for telnet like in Cisco?telnet x.y.z.q 80 /source-interface vlan a thanksAntero vasconcelos
What is the Maximum number of NAT pool entries that can be configured on an Extreme Networks EXOS X590 series switch. The SSA series has a limitation of 10 pools.Global Bindings: 65536IP Addresses: 2000Pools: 10Port Mapped Addresses: 20
I Start using GNS3 (Version 22.1.1.5) and trying to set up a link aggregation.
When using the standard sharing command I'm getting the following error:
* EXOS-VM.3 # enable sharing 1 grouping 1-2 algorithm address-based lacpError: PC environment su...
Hey guys it’s me again sorry for all the questions but I am still learning all this Extreme Switching stuff. I now have a new problem. So I have 8 Extreme X440-G2’s in my MDF and 6 in my IDF. I am using ports 51 and 52 with Cat6 jumpers to connect th...
Hi Guys, I have a problem configuring x670 switch from 1gb to 10gb port configuration, steps1 and step2 worked but step3 i want the port 2:1 to reconfigure back to 10gb but i get the error mentioned below. Is there a way to reconfigure 2:1 port to 10...
