Apologies in advance if this is an easy one... Basically the question is in EXOS, what would be the configuration to fail authentication open albeit MAC, PEAP, EAP-TLS etc if both RADIUS / NAC appliances become unavailable? With NAC / RADIUS not av...
Hi,I have a sharing group with LACP that I wold like to change the LACP key.Is that possible, I don't fine it on the manual.Regards,José Chaves
Hi Guys,a few days ago I had updated some test switches (x440-G2) from firmware 31.5.1.6 to 31.6.1.3. This changed the internal ssh handling.echo "show vlan" | ssh switchdoesn't work any longer. the switch removes the first 10 characters of the comma...
Hello,Below is a link to an article on MLAG two tier design.How To: Explaining Two-tier MLAG design | Extreme PortalExample below shows configuration from Top Left MLAG Peer Switch II: create vlan isc configure vlan isc tag 20 configure vlan isc add ...
Hi all,I'm trying private vlan on EXO before implement it in production. I'm using GNS3 simulator. SW1 is configured with one private vlan : - clientsA is an isolated vlan - INTERCO is the PVLAN's network VLAN I tried to two different ways : ClientsA...
