ExtremeSwitching (EXOS/Switch Engine) - Page 113 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Replacing EAPs ring switched with minimal downtime

Right now we have an 11 switch EAPs ring composed of 10 - 460's G1 and 1 -670 (master) in our local town. We have been tasked with replacing the 460s with 590's and 670 with 695 as master. We have some ring sites that cannot tolerate alot of downtime...

Resolved! Can't get PCs on VLANs to ping each other

Hey everyone,I've been tasked with figuring out how to implement VLANS for a few projects that are in the works. This is my first time working with VLANS. I followed this guide but ran into an issue: How To: How to enable inter-VLAN routing in EXOS |...

"Login failed through SNMPv1/2c - bad community name x.x.x.x" Logs

Hello everyone,I am scratching my head at some logs that I am receiving on some Extreme X440G2 switches regarding failed SNMP logins. I have compared both of the SNMP configurations and they both are almost identical minus a few users and one other c...

Traffic blocked suddenly

I'm doing a fresh installation and I suddenly lost connection to ESXi server behind X620 stack.I've done basic configuration only, configured stacking, enabled elrp, created VLANs, added a default route and enabled L3 based sharing for the ESXi ports...

Lost of OM connection to Switch

Dears , I need an explanation on why i could lose a remote management (OM) connection to my switch System Type: X480-24xAfter I implemented the command below to create a lag group to my Routerenable sharing 1 grouping 1, 3 algorithm address-based l...

Top Kudoed Authors

User

Count

32

29

20

20

17

GTM-P2G8KFN