ExtremeSwitching (EXOS/Switch Engine) - Page 114 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Why are 10G SFP ports not linking active in x460G2 and in "NP" state?

I just wanted to add:The NP state remains after reboot if auto-discovery is not disabled. You have to add this command in the article before the reboot:configure stacking-support auto-discovery disable Greetings

Controlling egress and ingress bandwidth on Exos switches

I've been researching how to control bandwidth with any newer version of Exos and looks like egress is simple with the configure rate-limit xx port x out dropcommand but didn't find any ingress. I did find a post about creating a policy to match all ...

Resolved! Does 'debug packet capture' work on EXOS Summit switches?

Hello all!I'm trying to get a local packet dump from a switch, but it doesn't seem to be working correctly.I have a series of EXOS 5520 switches where this command works perfectly fine (debug packet capture ports x on count 100 file-name pcaptest), a...

EXOS VM 22.7 and above

Hi All I am relatively new to virtualisation so it could be I am missing something . I am running GNS3 VM (ver 2.2.28) on Virual Box (Version 6.1.30 r148432 (Qt5.6.3). I have allocated 4 CPU cores and 8192 RAM for this VM . The OS is MAC OS ...

Resolved! ACL for Web HTTP?

I am unable to find any information regarding this. I am trying to setup an ACL to restrict access to the switch ENTIRELY except for the IP for XMC. I am unable to figure out how to include the web http module (the EXOS webpage for configuring the sw...

Top Kudoed Authors

User

Count

32

29

20

20

17

GTM-P2G8KFN