We are currently using ELRP to temporarily disable ports that detect a loop; if ELRP continues to alert, we then look to find the specific access port that is causing the loop.The issue we are having is that we are spending an inordinate amount of ti...
please help. i disable stp . but i can’t disable forwarding
I have one x590 core I configureed vlans and defined the DHCP and vlan IPS I have three stacked ers3626 and I configured vlans on them and used as L2 I cannot reach the core.Any steps I just want to have a data vlan in L2 and route the traffic to int...
I’m a new network admin and we have some older Avaya 5650TD-PWR and Avaya 4850GTS-PWR+ along with new Extreme 5520. I was needing to know if I am able to use an Extreme 5520 as a master and cascade my older Avaya switches via fiber connections?
At Node 4 BDX8, the main traffic is CCTV multicast. Routing between BDXs is done using OSPF and PIM-SM. As a result, the memory gradually fills up, causing the management module (MM) to reboot. Why this can happen?BDX1:System Memory Information------...
