Hello Commumnity, I have configured DHCP server on Summit X430-24t switch. I want to allocate a dedicated IPs to some servers using DHCP-binding. After going through documentation, I found command "configure ip-security dhcp-binding add ip ip_addres...
Hi there!I have an issue I could not solved, I have a x460 xos (16.2.5.4) which is connected to ISP for internet, MPLS router for LAN access in another interface and a third L2L interface (it should be used for redundancy in case ISP down).I have tr...
Hi, i am new into the extreme networks world, i am studying ExOS with a x435 to see if those series can fit my job. I am not from the networking realm, i am from coaxial tv world and i need to add ip systems to my portfolio. So expect i might say som...
Hello everyone.I on my Cisco Nexus 3064 and Extreme x650-24x configured 6 * 10G ports etherchannel. Then I built trunk on cisco and added tagged vlans on extreme. Everything is ok despite of vlan 1. I can't get traffic in vlan 1 although there are ma...
Hi!Has anyone used the micro-B USB port on the 5520, x465 or x870 for console? Is the serial device in the switch “generic” so any operating system will recognize it or is a special driver needed? From the hardware guide (for 5520):“There is one Micr...
