ExtremeSwitching (EXOS/Switch Engine) - Page 139 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

How to disable a port in sharing

Hi All How can I remove a particular port once it is configured as sharing? Suppose the following is the command saved in switch. “enable sharing 1:24 grouping 1:24,3:24,6:24 algorithm address-based L2 lacp” Now I need to rem...

Resolved! MACsec performance on 5520 series / LRM/MACsec

Hi there,we are planning to use encryption of some of our new uplinks with 10GBe and wonder how stable and fast the links will be with MACsec enabled.Is there any analysis on how the performance on 5520 (5520-VIM-4YE) or LRM/MACsec will be? Further w...

Multiple vlan sharing the same bandwidth on an ACL

Hello, I would like to know how to make several vlan share the same bandwidth (meter) on the ACL. Are the following commands sufficient? ACL_VLAN1 : # RuleNo# 6entry rateLimitOut { if match all { source-address X.X.X.X/30 ;} then { meter mt...

xmit hash policy used in VDX 6740

I have a server connected to VDX-6740 HW in a 802.3ad LAG setup with 2 Ethernet links (Not sure about the exact setup. I am a user of your products, not the admin).I would like to have some control over the load balancing. For outgoing messages, it i...

Resolved! SNMP AuthErrors Source

Hello,one of our switches showed a high cpu utilization and after a short look it seemed that someone sends SNMP requests without or with wrong authentication:SNMP stats:InPkts 10230358 OutPkts 10230357 Errors 10188902 AuthErrors 10188902Gets 101...

Top Kudoed Authors

User

Count

28

26

19

18

17

GTM-P2G8KFN