ExtremeSwitching (EXOS/Switch Engine) - Page 142 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Resolved! X440-G2-24p Fan Speeds

What is the go with the X440-G2 fan speeds. We have some of these switches in class rooms and cabinets in classrooms and they are so noisy. We also have some in one of our data centers and its at a much much lower temp, but the same fan speed? Offic...

Resolved! Direct VLAN traffic to 2 different firewalls

We are setting up 2 firewalls for internet access via 2 individual circuits. Currently our default route sends all traffic to firewall #1. We are looking to send all traffic from a single VLAN to the new firewall (firewall #2) and all other VLANS t...

Resolved! top of rack x690, dhcp - no req,ack

I’m trying to image a system in this expansion rack with my imaging system that functions in other racks. However, pxeboot never successfully assigns ip address.dhcp server (admin1) connected to top of rack 460 which connects to core x770, default vl...

Resolved! How to reset black diamond 8810 to factory default without knowing password?

We have black diamond switch 8810 in our institute. Unfortunately it’s password is lost and I want to reset it to factory default to reconfigure. Pl suggest what should I do?

Resolved! Vlan routing

Hello gentlemen,I need help from the most experienced.I have the following vlans configured on my core switch:1 - Default - 192.168.1.2/242 - IT - 172.17.41.1/243 - Fin - 172.17.36.1/244 - My Default gateway is 192.168.1.1 (My Firewall).I don't want ...

Top Kudoed Authors

User

Count

28

23

17

16

16

GTM-P2G8KFN