ExtremeSwitching (EXOS/Switch Engine) - Page 145 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Resolved! Erro:STP.InBPDU.Drop since replacing a Cisco switch for Extreme

In our core we have 2 X690 stacks running VRRP between them and we also MLAG between them to uplink to other closets. We just replaced a stack of Cisco 3750x switches in a 3rd floor network closet with two Extreme 5520 running EXOS 31.1.1.3. Connect...

Is the stacking disable command on master switch result in config loss

We have 2 ×460-g2 connected in stack. One of the switch went faulty now. We received new switch against RMA and we are going to add it back to the stack.Now the issue is by mistake we disabled stacking on working x460-g2 switch. So is the config for...

Resolved! 5520 switch 1000BT GBIC in 5520-VIM-4X wont link

I put a 1000BASE-T SFP (FS.com Extreme encoded) that usually works without hesitation in X450G2 switches in a new 5520 switch. This would be port 1:57. I connected a cable to an ethernet handoff and get no link. sh port 1:57 does not show any link ...

Resolved! Why is an EXOS switch sh iparp port command showing the ip and mac of a storage array management device in another closet?

In our datacenter we have two X690 switches at the core. All of our vmware and management and uplinks are tied into this core. There are two lacp load sharing links to different switch stacks in the building. We just put two 5520 switches in our 3r...

Resolved! Cannot Console to x590

Hello, I’m trying to connect to an x590 and the console screen only shoes weird looking “y’s” no matter what I do. The putty settings are correct and the cable works as I can console in to every other extreme device I have, just not this x590. This i...

Top Kudoed Authors

User

Count

28

26

19

18

17

GTM-P2G8KFN