I have just been setting up two new X590s with this version and found that two commands were enabled without me doing anything, yet the docs show that the default behaviour is disabledI suspect the docs are right and the config change is an error bec...
hello when i configured switch this save configuration but if the switch reboot lost the configuration, i can see this configuration in the switch:information on SW####################Slot: Slot-1 * Slot-2 ------------------------ -------------------...
Hello together, I tried connecting to a X870 (Firmware: 30.2.1.8) via the serial console, but the only thing I got back was this message:“E749: empty buffer” Unfortunately I was unable to find the source of this, maybe you can help me out with this. ...
Hello;I have configured an MLAG between 2 X590 routers with a double LACP link between them. This is my configuration:R1:create vlan "MANAGE"configure vlan MANAGE tag 1000create vlan "MLAG_CORE"configure vlan MLAG_CORE tag 250configure ports 29 descr...
I have a D2G124-12P switch from Enterasys, and I'm having trouble connecting to the console port. I would like to know the pinouts on the RH45 and DB9.
