ExtremeSwitching (EXOS/Switch Engine) - Page 155 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

XIQ Supplemental CLI for EXOS Sharing Group Uplink Config

Hi All,I have a few X450 G2 switches already in production as IDF switches with sharing groups configured for the up-links back to the core MLAG pair. Now I need to get these IDF switches on-boarded for management in XIQ. It does not appear there is ...

Resolved! Assign a Ip address to a X4400-G2-24p

Trying to install a x440-G2-24p switch. I want to put a IP address on the switch so I can use the GUI. I don't want to put it as the default. What command would I use to assign a IP address to the switch?

Resolved! FAN Module serial number X450 (Stack)

Hello together, is there a way to view all FAN module serial numbers on a X450 Stack without connecting to every Stack member individually?The Problem is in a Stack I can only view the serial number for the FAN module of the current Stack Member but ...

Resolved! Vlan MAC Limit

Hi,we want to set a MAC limit (1) on a VLAN on a port. The MAC is to be permanently configured and every packet that does not come from the MAC on the VLAN is to be discarded and not forwarded or otherwise stored/recorded. Of course there are other V...

ibgp routes showing in the " Route Origin distribution at the end of the show IP route command..

15 routes from IBGPAI am running BGP to JISC only , so why do I see this statement , sh iproute origin ibgpOri Destination Gateway Mtr Flags VLAN Duration#bi 136.148.8.0/23 0.0.0.0 0 UG-D--Bum--f- - ...

Top Kudoed Authors

User

Count

28

26

20

20

17

GTM-P2G8KFN