HiYesterday we had an unexpected result after configuring the exact command “enable ipforwarding” in our Switch Extreme Netowrks X460-G2-48X-10G4, it was supossed that all vlans would enable ipforwarding but instead all vmans were ipforwadingg disabl...
Hello everyone!Hope you all are fine and healthy. I have been working with the configuration of some Cisco APs connected to a Cisco switch / Switch Extreme for three days. However, so far, no success in this task. As a result, I decided to raise my h...
Trying to pre-stage a 2 switch stack (5520). They both have 4 port nims in the side. When it goes to its destination SFP+ ports will be plugged in and uplinked to an existing connection (migrating from a Cisco stack). I am getting this message when...
Hello, we want to monitor our uplinks to our switches.Therefore i found the command : “Show port x Transceiver Information Detail”These are the values i wanted to get via SNMP to monitor them on PRTG.I have two problems.The first is that i get differ...
On this brand new two 48 port 5520 switch stack I’m seeing this log entry periodicaly01/27/2021 16:25:10.86 <Info:cli.logLocalCmd> clearflow iqagent: enable dhcp vlan Mgmt If I do sh configuration | i dhcpenable dhcp vlan Mgmt We are not using vlan m...
