ExtremeSwitching (EXOS/Switch Engine) - Page 182 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Are we overthinking DHCP Snooping?

We have read https://extremeportal.force.com/ExtrArticleDetail?an=000080865 but still have some questions. We have a core switch on which there is 1 DHCP server connected in a “Internal_Appliances” VLAN. Also on that VLAN is a “Desktops” VLAN that h...

How can I get an email alert when mac security disables a port?

Hi I would like to see if an EXOS switch like an X450 can send emails if mac-locking shuts down connectivity to a port. We do have netsight up and running and get alerts for things like fan failures. How can we get alerted if last violating mac ad...

Resolved! Cyclic timeout on the console port (mgmt / ethernet) - X690-48x-2q-4c

X690-48x-2q-4c ExtremeXOS version 22.6.1.4 Exactly every 15 minutes timeout appears on the mgmt (ethernet) port. No ping response, hangs up the connection. The switch to which the mgmt port is connected does not report breaks or problems with packets...

SSH access not working on summit x440 with 16.2.5.4 -pathc-13 firmware version

Hi, everyone I have ssh enabled on my x440, I have restarted processes and also re enable ssh2, and still cannot access via ssh. I have issue this comands “restart process exsshd” and also “restart process thttpd” and still cannot access...

Resolved! X440-G2 or X450-G2 as access switch?

Hi! Would the X440-G2 be a suitable access switch in a large network? Segmentation is OK so most places where these would sit have some 15 VLANs and a total of max 2500 MAC addresses. The X440 (non-G2) was not a very good switch in these situations w...

Top Kudoed Authors

User

Count

28

22

17

16

16

GTM-P2G8KFN