ExtremeSwitching (EXOS/Switch Engine) - Page 196 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Extreme NAC Removal

I’m trying to remove one of my switches from NAC. I’ve removed the switch from NAC, and removed most of the configuration information from the switch but I can’t seem to remove the following configuration for all of my ports. I’ve tried the typical “...

Resolved! Does extreme x670-g2 support pvst protocol?

At one of the customer site, I need to migrate 2 nos of cisco 6500 series routers to 2 nos of extreme x670-g2.Existing customer network is configured with spanning tree protocol PVST. So does extreme x670-g2 support pvst protocol? If not then for thi...

Equivalent EXOS commands required for following cisco commands

service nagleno service padservice tcp-keepalives-inservice timestamps debug datetime msec localtime show-timezoneservice timestamps log datetime msec localtime show-timezoneservice password-encryptionservice linenumberservice sequence-numbersservice...

Log management recomendations

Hello, long time not posting in here, will like to know your recommendations for log management for extreme switches. Thanks

Resolved! X690 and long distance stacking

Hi community I have found i user guide that for stacking this switch supports 61 and 69 data ports and also that only QSFP28 DACs with lenght up to 5m can be used . Does it mean that stacking for longer distances is not supported ? I would like to ...

Top Kudoed Authors

User

Count

32

28

20

20

17

GTM-P2G8KFN