ExtremeSwitching (EXOS/Switch Engine) - Page 197 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Resolved! Cyclic timeout on the console port (mgmt / ethernet) - X690-48x-2q-4c

X690-48x-2q-4c ExtremeXOS version 22.6.1.4 Exactly every 15 minutes timeout appears on the mgmt (ethernet) port. No ping response, hangs up the connection. The switch to which the mgmt port is connected does not report breaks or problems with packets...

SSH access not working on summit x440 with 16.2.5.4 -pathc-13 firmware version

Hi, everyone I have ssh enabled on my x440, I have restarted processes and also re enable ssh2, and still cannot access via ssh. I have issue this comands “restart process exsshd” and also “restart process thttpd” and still cannot access...

Resolved! X440-G2 or X450-G2 as access switch?

Hi! Would the X440-G2 be a suitable access switch in a large network? Segmentation is OK so most places where these would sit have some 15 VLANs and a total of max 2500 MAC addresses. The X440 (non-G2) was not a very good switch in these situations w...

Error on downloading 30.6 file for 440G2

I get this error - Error: Failed to download image - Image signature cannot be validated. - on the file summitX-30.6.1.11-patch1-2.xos for the 440-G2. The non-patched version works ok.

Port-based VPLS

Hi,I’ve successfully setup a VPLS tunnel between 2 hosts via 2 switches thanks to this doc:https://extremeportal.force.com/ExtrArticleDetail?an=000081349But in this case, I can only pass a single client VLAN per service.I would like to be able to pas...

Top Kudoed Authors

User

Count

28

26

19

18

17

GTM-P2G8KFN