ExtremeSwitching (EXOS/Switch Engine) - Page 198 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Adding 4950GTS to existing 4950GTS stack

I have an existing stack of 2. I’ve verified that versions and licenses are identical. As far as configuration goes, are the configurations copied down onto the new member when it gets added to the stack or do I have to manually do it prior? my p...

Extreme X460-G2-48x-10GE4 Ring Topology with CISCO Switch 9600 (Virtual Stackwise)

Hi Tech People, In our LAN Topology , we have 5 Exteme Switches in ring toplogy. There is single 2x10G link from Extreme switches to two Core Switch paird in Virtual chassis e.g. Extreme Switch # 1 has single link 2x10G to the CORE and Extreme s...

X670 Switching MLAG with more than 2 members

Hi, hope you’re all well. I currently have an MLAG configuration in a standard setup on a pair of X670 switches, that is 1x 10G member in each switch. We now have a requirement for some additional bandwidth on the same bond, and I am having trouble f...

syslog via SNMP Traps

Is it possible to encapsulate syslog via SNMP traps in EXOS? one of my clients wants to send syslog over SNMP to a syslog server. Any leads? Thanks

Are we overthinking DHCP Snooping?

We have read https://extremeportal.force.com/ExtrArticleDetail?an=000080865 but still have some questions. We have a core switch on which there is 1 DHCP server connected in a “Internal_Appliances” VLAN. Also on that VLAN is a “Desktops” VLAN that h...

Top Kudoed Authors

User

Count

28

26

20

20

17

GTM-P2G8KFN