ExtremeSwitching (EXOS/Switch Engine) - Page 202 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

MPLS LDP Adjacencies Limitations

Hello Community, What if the MPLS LDP Adjacencies reach above the limitation ? What`s the behaviour? I do have one X670-G2 with 83 adjacencies/peer and I`m curious to know if there`s some information in the switch to know if some parameters are abo...

ECCN Number & CCATS Number for X440-G2-48P-10GE4

Hello, these are my products; 16535 - X440-G2-48P-10GE4 97000-16535 - SOFTWARE AND TAC 16542 - DUAL 10GBE UPGRADE LICENSE I need this informations for the products above; ECCN Number Export License Warning Export License Country Licence Exception Lic...

Connecting/Uplink Summit x450 to B5 with CAT6

Hi out there, what do I need to do to get a summit running on a B5 on the same network? This is the current configuration: configure vlan default delete ports all configure vr VR-Default delete ports 1-16 configure vr VR-Default add ports 1-16 config...

snmp traps / syslog message for optical values out normal range

How can I get my XOS device to send snmp-trap or syslog message if the optical values are out of normal range? show port 1:1 transceiver information Port Temp TxPower RxPower TxBiasCurrent Voltage-Aux1/ Voltage-Aux2 (Celsius) (dBm) (dBm) ...

Review my ACL

Hi guys, I need to add a Dynamic ACL before a deny rule on my Black Diamond. The allow policies are called Voffice1 and Voffice2. The last policy is called VofficeDeny. 2 questions: 1- If I create a new Voffice3 policy that will allow, can I drag i...

Top Kudoed Authors

User

Count

28

26

20

20

17

GTM-P2G8KFN