Have an interesting dilema. We’re using a VLAN (4090) between two X620 MLAG cores (east/west campus). We’re routing two small subnets from within the Extreme default VR on each side into this transit VLAN for for high-speed connections between PBX’s....
Hello Community, What if the MPLS LDP Adjacencies reach above the limitation ? What`s the behaviour? I do have one X670-G2 with 83 adjacencies/peer and I`m curious to know if there`s some information in the switch to know if some parameters are abo...
Hello, these are my products; 16535 - X440-G2-48P-10GE4 97000-16535 - SOFTWARE AND TAC 16542 - DUAL 10GBE UPGRADE LICENSE I need this informations for the products above; ECCN Number Export License Warning Export License Country Licence Exception Lic...
Hi out there, what do I need to do to get a summit running on a B5 on the same network? This is the current configuration: configure vlan default delete ports all configure vr VR-Default delete ports 1-16 configure vr VR-Default add ports 1-16 config...
How can I get my XOS device to send snmp-trap or syslog message if the optical values are out of normal range? show port 1:1 transceiver information Port Temp TxPower RxPower TxBiasCurrent Voltage-Aux1/ Voltage-Aux2 (Celsius) (dBm) (dBm) ...
