Hi All, I setup a new EXOS Appliance (exosvm.30.2) and when I start it out, whenever I made changes, and wanted to save configuration with usual save configuration cmd, it is cancelled automatically ,whatever I put yes/no !!! it is a very annoyin...
Since EXOS 30.2 you can download to every EXOS Version also a new xmod called summitX-30.4.1.2-optics.In which use case should i install that xmod?What are the advantages i get on a summit switch if i install this xmod currently ?All supported (extre...
Hi! We’re considering using multiple pairs of X590 setup as MLAG peers. Looking at one pair (one MLAG peer pair), what would be the best way to build it considering the lack of 40/100 G ports? The X590 has three 40/100 G ports but all three can only ...
Is it possible to build “SummitStack-V” between X450-G2 & X460-G2 using 10GBE.Do I need anything else as the two Switchches and four SFP+ modules?Licenses? what ever? Cheers Joe
Good Evening, what is wrong ?I want to detect a phone with OUI.ThankGiuseppe************Profile Contents Begin************#MAC OUI VLANs#@VariableFieldLabel "MAC OUI Number 1 (xx:xx:xx:)"set var MAC1 00:1A:E8:#@VariableFieldLabel "VLAN for MAC OUI Nu...
