hi everyone, i am currently testing the integration of exos switches in Solarwinds software (IPAM/UDT). In order to correctly assign MAC addresses to IP addresses, the following OIDs are required: ipNetToMediaTable = 1.3.6.1.2.1.4.22 ipNetToPhysical...
I have 2 of these Switches stacked on eachother. The top one is more under load most of the time and is currently running at 89F(31C) All 4 fans are between 8000RPM and 9000 RPM Why is it that they would be spinning at that rate? and why only this...
Scenario is: if all port A,B,C, are UP than enable port D If one of port A,B,C are Down do anything create upm profile MnLinkUp enable cli scripting IF (!$MATCH($EVENT.LOG_COMPONENT_SUBCOMPONENT,vlan.msgs) && !$MATCH($EVENT.LOG_EVENT,portLinkStateU...
Hi guys, I'm coming up ExtremeOS-VM over GNS3 using mpls and mpls-te under IS-IS, so, all routes are being received and sent to peers, however the interface tunnel is not getting up. So, in this scenario I was using OSPF where it was working fine, ...
Hello I'm curious about the role of Asic in the Extreme XOS series. And can I check the asics table? And finally, can we see the images with physical traffic flow? Thank you.
