Hey, Can you validate that the following is a valid setup using MLAG. Sites A and B contain two MLAG peers each. There are two independent links between sites A and B, and in order to connect both sites, both peers can use MLAG at each end. (Each ...
Extreme switch is under TACACS authentication and I could not move from execution level (>) to configuration level(#) . see below commands and error Slot-1 NEOS-PS-FWswitch.6 > show configuration This user does not have permissions for this command...
I'm new to Network Administration but I'm working on configuring ACL's to allow two subnets to communicate with each other across two sites. Isolation needs to exist so hosts within the subnets can only communicate to each other and the internet. As...
Hi Guys, I've never applied and access list on Extreme Networks switches. I need to know how to apply a upload a ACL to a Black Daimond. I have about 10 VLANs I Need need: 1.- Permit all access on the same VLAN 2.- Permit all access to some serv...
I can serial into the x440g2 w/Exos 30.3 - no problem - appears to be set for 9600,n,8,1. I would like to be using 115.200K. I did not see this covered in the command reference guide. Maybe I just missed it - but anyways, is it possible to up the ba...
