ExtremeSwitching (EXOS/Switch Engine) - Page 279 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

VRRP between x670_G2's

Good afternoon, We have a total of 4 x670_G2 switches at one of our customers, connected by backbone (40GB). 2 of them are located in one server room, 2 of them in another (about 200meters). These switches are operational and can all communicate wi...

virtual exos 26.1.4 - Tagged traffic not working

Hi all, Has anybody successfully got the virtual exos 26.1.4 working with tagged traffic on ESXi? Spent ages thinking it was the VM environment but it does not appear to be. Simple test scenario: create vlan test config vlan test ipaddress 10.1.2....

Virtual EXOS Switches limited to 100 Mbps?

Hi all, Completely understand the Virtual Exos images are non-production, but trying to get an understanding of why the ports are limited to 100 Mbps? Unfortunately you cannot turn speed auto off, and try 1000. Even though the documentation says usi...

Resolved! Block SNMP traffic to devices

Hello all, I'm a bit of a exos newb and need assistance. Is there a way to create an ACL to specifically block SNMP traffic to a device connected to a port? I was thinking of using the GUI route and set up a dynamic ACL. Would this be a good idea or...

Stacking Ports Flapping X460-G2

We have 9 X460-G2 stacks running version 22.5.1.7 and we have noticed that the stacking ports are flapping on a regular basis. The link goes down on Stacking ports 1:2 and 2:1 then comes back up. Has anyone else experienced this problem? What was th...

Top Kudoed Authors

User

Count

28

26

20

20

17

GTM-P2G8KFN