ExtremeSwitching (EXOS/Switch Engine) - Page 281 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Resolved! Question about X460G2-48p Extreme Stack switches

Hi all, I need to clarify a question regarding Extreme stack with ISC cable. let's say we have two X460G2 switches in a stack. One is Master and the second is Backup or Standby. If we have end devices plugged in to the switches which are not maste...

Switch Hardware

Posting this question here because the 'Switching Routing' sub forum didn't return any replies. We have 2 switch models (x460, x670) in our environment that are running 10Gb SFP+. My one problem I have with them is that these are fairly large in s...

Resolved! Link Aggregation negotiate in half-duplex

I configured two port in aggregation between a X440G2-24t-G4 and a Moxa EDR 810 both in static mode. Everything seems working fine but the two ports of the Extreme switch negotiate in half-duplex (with show port information). However Moxa shows his t...

VRRP between x670_G2's

Good afternoon, We have a total of 4 x670_G2 switches at one of our customers, connected by backbone (40GB). 2 of them are located in one server room, 2 of them in another (about 200meters). These switches are operational and can all communicate wi...

virtual exos 26.1.4 - Tagged traffic not working

Hi all, Has anybody successfully got the virtual exos 26.1.4 working with tagged traffic on ESXi? Spent ages thinking it was the VM environment but it does not appear to be. Simple test scenario: create vlan test config vlan test ipaddress 10.1.2....

Top Kudoed Authors

User

Count

28

26

20

20

17

GTM-P2G8KFN