ExtremeSwitching (EXOS/Switch Engine) - Page 320 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

How to XOS and Config with option 43

I've read this article:https://extremeportal.force.com/ExtrArticleDetail?an=000088673And was wondering if there was more detailed documentation on this out there. Also, has anyone developed a tehcnique to template the config file, that is perhaps pro...

ELRP across multiple stacks

Hi, Have a scenario where we are using ELRP, which works great for disabling ports on the same stack but we have a stack in the same room and want to protect across the two - is this possible? My theory was that should an edge port see a ELRP PDU f...

Link aggregation (BD8810) will work with other vendor Netgear switch ?

Link aggregartion (BD8810) will work with other vendor Netgear switch ? I checked netgear it will support LAG I want the compatability whether both will work connect back to back through LAG ?

How to create the ACL Policy on Extreme X440-G2 Switch?

We have created 3 VLAN such as VLAN-1,2,3. Now, VLAN's should not communicate with each other they should be able to reach the only internet... How do we create the policy and map it appropriate VLAN Kindly help us to resolve the issue... ...

netlogin commands doesn't exist in command line on X440G2 v21.1.1.4

I'm configuring netlogin on a X440G2, and some commands aren't show in the CLI 1) the option "mode" dosn't exists configure netlogin ports 2:35 mode mac-based-vlans 2) the option "vlan" dosn't exists configure netlogin vlan NAC-EXTREME * Slot...

Top Kudoed Authors

User

Count

28

23

17

16

16

GTM-P2G8KFN