Hi, im having a virtual lab, where i try to practice MLAG, the topology is as in the diagram now i have a problem and some questions regarding MLAGmy problem that MLAG doesnt come up, i have followed the following on both EXOS1 and EXOS2 switches E...
I have created a GRE tunnel between a 460g2 and another device. I have configured a /31 on the GRE tunnel. I have enabled forwarding on the GRE tunnel. I am only able to ping the remote side of the tunnel from the 460 itself. I can ping using its IP...
When I mirror several vLANs toward a port, I can see all broadcast traffic but no unicast traffic. It's a little bit like if the monitoring port had been inclded in the vLANs mirrored but no mirroring happen at all... Is there some configuration I mi...
I am looking at a configuration provided to me by a client on an existing Extreme switch. They are needing me to translate this configuration to a Cisco configuration. The configuration from the Extreme switch shows: configure mstp region 00049635f7...
I have a BD8806 that i'm unable to login after power modules failed and replaced by some new ones.I'm suspecting it lost some configs during the fault because all the users are unable to login using the console. Tried to reset to factory settings usi...
