ExtremeSwitching (EXOS/Switch Engine) - Page 353 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

how to see perticular port mac in X450a-48tdc, not what are the MAC received.

I want to see MAC address of particular a specific Port (e.g. port no. 35) Note:- Not what are the MAC received on that port (sh fdb ) Is there any procedure to check that or System mac is the only one ?

Two offices setup with the same configs, but different hardware and XOS versions, but WOL won't work on the newer equipment

We have one site with the following configs: Location A Core switch (Summit x450a running XOS 15.3.4.6) that is connected to a desktop stack (Summit x440 running XOS 16.2.4.5) Location B Core switch (Summit x460-G2 running XOS 22.4.1.4 patch 1-2) t...

x460 configuration help needed!

i'm very new to networking, i need some tips to walk the right way. i need to configure a x460 switch. i have some internal devices with ip 150.xxx, they should'nt interfere with outside. i have some outside devices that should receive multicast st...

X870 Console Prt Baud Rate

Just a question. Whatever possessed you to change the baud rate on the X870 console port to 115200? Every one of the other 2000+ network devices I look after, including all our other Extreme switches use 9600. Which means, each time I connect to o...

User Acceptance Training for EXOS Switching

hi, im currently looking for test cases or user acceptance cases we could use as reference for our project?

Top Kudoed Authors

User

Count

28

27

20

20

17

GTM-P2G8KFN