Hi,
Is there a way to enable by default for every ports the STP mode edge-safeguard with bpdu-restrict ? Like the "spanning-tree portfast default" and "spanning-tree portfast bpduguard default" on Cisco switches.
I'd like to enable the edge-safeguar...
Have a question about auto provisioning a spanning tree link type.
All the Vlans have been configured for the switch and each added to ports accordingly. In this example there are multiple Vlans and each Vlan has its own STP domain. An example of pa...
Hi,
I have some problems with routing. I hope you can help me quickly.
Thats my iprouting table
Ori Destination Gateway Mtr Flags VLAN Duration
#s Default Route 192.168.100.1 1 ...
We are currently gathering data from edge stacks with poor performance and are doing all we can to look at memory optimisation. I have a situation as below which is troubling me....
stack 1 :
x450e-48P (8 slots) SW 15.3.4.6
config detail has :
conf...
