ExtremeSwitching (EXOS/Switch Engine) - Page 366 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Policy cannot be enabled when double width access-list

Hi There, Just wondering if anyone has seen this issue, or know what its complaining about and how to correct. Trying to run the command: enable policyThis is on an X670G2, Core License running version 21.1.4.4 Patch 1-3 I get the following error:...

ACL policy to restrict telnet is not working as desirable

I'm new using extreme switches. I have configured the following ACL policy to allow only the networks listed in the policy to connect by telnet to the switch model X480-24X, running ExtremeXOS version 15.6.4.2, however only the host with IP address 2...

New Summit x440-g2-24p-10ge4 when powered on the FAN 4 runs at a constant 15000RPM

I got 2 new New Summit x440-g2-24p-10ge4 Switches 1st one, when powered on the FAN 4 runs at a constant 15000RPMThe rest of the Fans, are quiet at 2100RPM, while nothing is plugged in. Then the second one runs normally with normal fan speed but as...

ACL Mirror filtering across all ports?

I don't have backup traffic separated and have 2 port analyzers which I mirror and copy too. I want to filter using an ACL to block destination and port from reaching the mirror "to" ports. I believe my config is correct but since the sources span ...

PIM multicast and RP topology – need advice

I have PIM SM running on a dual core 8810 environment with edge user switches connected. The multicast source server used to terminate here but changed to a vm a few years back which moved to our TOR 10G switches, and these dc670’s connect dire...

Top Kudoed Authors

User

Count

28

26

19

18

17

GTM-P2G8KFN