ExtremeSwitching (EXOS/Switch Engine) - Page 375 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Xenpak on port 49 detected, unable to read Oui, possible mdio read error

Xenpak on port 49 detected, unable to read Oui, possible mdio read error summitIsXenpak2Operational: port 49 data=ffff Getting this repetitive error, not able to find any thing on extreme # sh port 1:49 2:49 3:49 conf no-refresh Port Configura...

conf_diff.py: explanation of returning output

Hi, i am playing around with "conf_diff.py" and i have some problems to understand the output. Switch X450G2-48p-G4 - EXOS: 22.4.1.4 SW-TEST.21 # run script conf_diff.py Comparing configurations, please wait... error-correction off disable mac-l...

SNMP query to get routing table info and search first 2 octets

I have a simple python script that does a SNMP walk on a Extreme switch and returns routing table. snmpwalk -v2c extreme-sw1.com -c comm-string .1.3.6.1.2.1.4.21.1.11 The issue is, this slows down the script significantly as it takes around 1 min...

Virtual Router Specific Config

We are looking at creating a new VR to segregate the routing of traffic. I've setup a lab for this and have it working conceptually. A couple of issues/questions: 1) it seems that it is very difficult to identify virtual router-specific config. Fo...

Show which vlans are tagged / untagged on a single port

When using the "show port info detail" command, it will provide a list of all vlans assigned to a specific port. On an uplink port, the native vlan should be set as untagged, which with Extreme is the "default" vlan. How does the output from this...

Top Kudoed Authors

User

Count

28

26

19

18

17

GTM-P2G8KFN