ExtremeSwitching (EXOS/Switch Engine) - Page 374 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Private VLAN routing issue

I've configured a private VLAN for ports 1 and 2 so that they are isolated from one another. The configuration shown below is how I set it up, however, when I place a client on port 1 I can not ping the gateway.The client can ping the VLAN Mgmt99 IP...

Best practices for shared MAC on MLAG peers?

Creating an MLAG between two 440-G2's. The ISC will be an LACP of ports 15 and 16 and if I understand it, this LACP link must have a static MAC assigned on both sides of the ISC (on each peer). Is there a recommendation in terms of the MAC to use (do...

EXOS 22.5 "Creating Processes on Secondary Nodes"

One of new EXOS 22.5 Feature are this: "Creating Processes on Secondary Nodes" Changed CLI Commands Changes are underlined. create process name executable exe {start [auto | on-demand]} {nodenode} {vr vr-name} {description description} {arg1 {arg...

What is the EXOS License support dyanmic ACLs ?

Hi all I have a some question about dynamic acls in EXOS switch. What is the license can i useing dynamic ACLs in switch ? all license or need to edge licence over?

extremePortEgressRateLimitTable-implementation in firmware

Anyone know when the extremePortEgressRateLimitTable snmp-value is going to be implemented? I need it We use rate-limit egress on switchports to control bandwidth, and policy+meters on ingress.. Ideally, I need a way (through snmp) to query many sw...

Top Kudoed Authors

User

Count

32

28

20

20

17

GTM-P2G8KFN