Sorry about my English. I attached my topology. I created vrrp and mlag configuration. It works but when I connect Edge2-Core2 or Edge4-Core3 or Edge6-Core1, occur loop. How can I create stp configuration. Is an stp domain enough?
I am mirroring a port that has the following ACL applied to a port's egress and see traffic not destined to 00:a0:aa:d0:01:08 in the captures. Does the mirror look at traffic before it hits the ACL or after?entry host8{if {ethernet-destination-addres...
Hello,The subject of the question is the first line of VLAN configuration on a X670-48x running EXOS 16.2.5.4. I know wicked old. Anyway, this configuration has been around for ages and I'm looking to do some cleanup before I try to meld more VLANs ...
Hello to all the expertsI want to configure the EXOS switches that I have in the network by RESTCPNF API, but I have several problems. Thank you for your help.1- There is no SNMP configuration in DATA MODELS YANG, how can SNMP be configured by RESTCO...
Hi Guys,I would need help to convert Route-map and prefix list config to EXOS.Below is EOS config.ip access-list standard bgp-to-ospfpermit anyexitip access-list standard A_Routepermit host 0.0.0.0exit!route-map redistribution bgp-to-ospf permit 10ma...
