ExtremeSwitching (EXOS/Switch Engine) - Page 415 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Getting clean output from Extreme switch CLI using Python

I am writing a python script to run some show commands on Extreme switches and storing output in a variable. I am able to accomplish that but the output is not as I would like. I am seeing the command and also switch name in my output but I would l...

Ghost password issue !!

Afternoon all, I have a weird issue with a X670V switch that we have. I downgraded it to version 15.2.2.7b7 for the simulation of an upgrade that we're scheduling. So hopped on the swtich, unconfigure all, reboot... all good so far Upon reboot, dow...

TCL function (regexp and regsub function only don partial)

XOS 15.5.2.9 patch1-5 set var a "12345:54321:7806" set var x $TCL(regexp -all {([0-9]*):([1-5]{5}):([0-9]{1,4})} $a match s1 s2 s3) show var ---------------------------------------- Count : 5 ---------------------------------------- ------------...

Problem to configure STP BPDUGuard and LLDP on X460-g2

Hi all, we are using a lot of C5-, G3 and K10 Serie switches as edge devices and have configured them with following restrictions: - all edge ports must use MAC- and 802.1X- authentication - all edge ports has to disable the port if BPDU's will recei...

UDP profiles stop working

We have a number of udp-profile configured to support DHCP which are set on our distribution , we have a number of distribution switches paired for resilience which connect to teh core. After a managed core reboot , one of the Zone pair switches st...

Top Kudoed Authors

User

Count

28

26

20

20

17

GTM-P2G8KFN