I am trying to move our Polycom unit to its own VLAN to try and isolate/eliminate dropped packets. I changed the static IP address, subnet, and gateway on the Polycom out of the range of the existing Admin network. I created the VLAN and tried to m...
Hi. Im try to create vlan over snmp - i understand that it must be in EXTREME-VLAN-MIB. there is: extremeVlanIfIndex 1.3.6.1.4.1.1916.1.2.1.2.1.1extremeVlanIfVlanId extremeVlanIfVlanId 1.3.6.1.4.1.1916.1.2.1.2.1.10 extremeVlanIfDescr extremeVlanIfDes...
Hello I have a extreme core switch (A) where an lwl cable is connected to another switch (B) (uplink port) The switch (B) has no ip address yet. I can only access the switch if I connect directly with a notebook via the management port. I can acc...
I've configured a back to back CFM domain between an X460-48x and an X670V-48x, created the association and added the remote rmep and lmep. X670V-48x Review configuration below: create cfm domain string "Access" md-level 2 configure cfm domain "Ac...
Does anyone happen to have a transit ACL on a publicly routed ExOS switch? I'm using an X440 stack as an internet gateway for a customer. I did create an access profile for all of the management profiles only permitting certain IP ranges to gain a...
