ExtremeSwitching (EXOS/Switch Engine) - Page 52 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

How can I flush DNS in EXOS switch? IP of a RADIUS server has changed.

All of our switches have a primary and a secondary radius server defined by its DNS name. Exampleconfigure radius mgmt-access primary server hq-nac-01.domain.comconfigure radius mgmt-access secondary server dr-nac-01.domain.comWe moved the dr-nac-01...

ACL one way

Hello, I need to create an access list based on subnet IP source and destination and applied in a VLAN interface, the ACL work fine when we need to block all traffic, but when we try to block the traffic in one way like reflexive ACL in Cisco i...

intra-vlan traffic block

Good Morning, I am looking a way to block intravlan traffic.I have a couple of 5520 as core and lot of X440G2 as access.I have a Vlan that is configured over all switches.It can communicate with Internet and other vlan but the users on this vlan can...

[X450] route leaking issue

Hi,I'v tried to configure route leaking between 2 vlan in 2 separated vr.Vlan1 192.168.1.254/24 --> VRF1Vlan2 192.168.2.254/24 --> VRF2I enabled ipforwarding on both vlan.If I want to reach 192.168.2.0/24 from a pc in 192.168.1.0/24 I assumed tha...

Cannot disable ports on master node X690

Hello,I cannot seem to disable ports on master node. Switch model is X690. Any help would be appreciated.Thank you.

Top Kudoed Authors

User

Count

28

26

20

20

17

GTM-P2G8KFN