ExtremeSwitching (EXOS/Switch Engine) - Page 524 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

DHCP-Snooping, ARP validation with port specific tags.

Hi, I have a case where i can't get DHCP-Snooping with ARP validation working when using port specific tags. In my homelab i've used the following settings (which work): - DHCP server on port 6. - Client on port 10. * config lines: configure truste...

WoL Implementation - Updated?

Hi All, I have found some information on implementing WoL (Wake on Lan) in EXOS, but its a few years out of date. Is it still current? How comes this isn't built into EXOS or is it that the specific routing protocols don't allow for the functional...

Q-in-Q Inner VLAN ID Broadcast Traffic

Hi, It is possible to associate a port to combination of outer and iner vlan ID in Q-in-Q (802.11ad) configuration? The target is not have broadcast of specific outer and vlan ID will not go to all outer vlan ID associated ports. Any better way of ...

some devices return "sh: ./sftp: not found" when firmware upgrade via scp2

We were in a process of updating EXOS switches via Netsight script and we noticed some switches have not been upgraded. These set of switches have EXOS ver 21.1.0.17 Then I manually tried to upgrade using scp2 vr "VR-Default" root@:/root/firmware/im...

XGM2-2sf - only for stacking?

I have a Extreme x450e-01 with a XGM2-2sf module in the back. I have two servers which have SFP+ NICs. I want to connect those two servers to this switch through that module. Is this feasible? My goal is to have the two servers connected to the s...

Top Kudoed Authors

User

Count

32

29

20

20

17

GTM-P2G8KFN