ExtremeSwitching (EXOS/Switch Engine) - Page 525 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Warn:BGP.RIBMgr.ProcStubMsgDataLost

Hi Experts What does the given error message mean? It shows up in logs. ****************************************************** Warn:BGP.RIBMgr.ProcStubMsgDataLost An attempt to process an ATG_I3_INET_ADDR_IND has failed due to local ...

DHCP snooping log message

Hi Experts, I have an extreme switch running v15.1, there is an log message printed out, may I know what does the message mean? 10/23/2016 01:21:05.83 exosDhcpSnoop registered exosDhcpSnoop device (0)

Upgrade EXOS 16.2 for BD 8800 MSM-48c

Hi expert, We are going to upgrade EXOS from release 15.3.2.11 to 16.2.1. Current HW is BD 8800 MSM-48c. Please advise if release EXOS 16.2.1 does support current HW MSM-48c? And anyone already do upgrade it? please share your experience Thanks!

Why is the default for iparp max entries 8192?

It seems that user traffic would be negatively affected if entries are not stored because the configured max is too low. We recently began looking at some networks that were at the cap 8192, so we increased the cap to 16284. After the increase we fo...

What are the Command to passtrough Customer-LACP through an Extremeswitch with sw 22.1

Setup: Point to Point connection with two Extreme x620. We have setup a VMAN for transparent Service. Customer use LACP on both end that we have to transport from A-Switch to the B-Switch. Now the LACP goes not trough by the Extreme with an VMAN? C...

Top Kudoed Authors

User

Count

28

27

20

20

17

GTM-P2G8KFN