ExtremeSwitching (EXOS/Switch Engine) - Page 528 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

More Vman configuration questions

Im trying to configure Vman for the first time and hopefully have followed the documentation for a basic system. Ist switch Slot-1 SLOUGH_SWITCH4.69 # sh conf | include vman configure vman ethertype 0x8100 create vman "SLOUGH4088" configure vman SL...

SSH RSA keys via Radius?

Is there a way to authenticate RSA Keys for ssh against radius instead of only locally? The reason i ask is it would seem to be a alot more useful to load the PubKey onto the radius server that all extremes use instead of loading all the keys onto ea...

Help with routing on a multi vlan stack and cisco meraki

This is basically how I have a network setup right now. A stack of 6 switches with VLANs 1, 101, 102 and 103 on them connected to 192.168.100.9 with just vlan 1 on it. The VLANs on the stack have .2 addresses and its using the Meraki .1 for routing. ...

Mirror vlan tag

I've checked using Wireshark.scenario. Sw1 -vlan 10 192.168.10.1/24 tag 10 -vlan 20 192.168.20.1/24 tag 20 -vlan 30 192.168.30.1/24 tag 30 ===== Trunk ====== Sw2 -vlan 10 192.168.10.2/24 tag 10 -vlan 20 192.168.20.2/24 tag 20 -vlan 30 192.168.30...

Telnet problems on VRRP virtual address

I'm currently trying to take remote access (via telnet or SSH) on a virtual VRRP ip address that is shared by two x670v switches and it doesn't work. To figure out the problem, I've also tried to access via physical address on the same LAN that is ...

Top Kudoed Authors

User

Count

27

16

16

14

12

GTM-P2G8KFN