Hi, when trying to add another instance of VRRP to a switch (stack of two X670-G2, EXOS 16.1.3.6-patch1-8), VRRP for that VLAN stays in state INIT. After enabling VRRP for the VLAN, a message is printed that VRRP will only become active with active...
Next hop self not working as expected in i-BGP peering. We have e-BGP peering across Extreme pair of L3 switches towards ISP routers. Also we have i-BGP peering between application nodes and the Extreme switches. Refer to diagram below. Default route...
Hello, all! Have few X440-24t. After upgrade all of them to EXOS 16.1.3 2 switches show that fans is failed 2 swithes has a problem, other work normally. Aftre downgrade to EXOS 16.1.2 or earlier (EXOS 15) - all work fine. Any ideas? Thank you!
my config VLAN 1 IP adress is set, no ipforwarding, default route is set - gw is from same subnet. VLAN 2 IP address is set, no ipforwarding. I need management access from VLAN 2 subnet. Ex. there is Netsight in same VLAN/Subnet. VLAN 1 should be us...
Hi Guys, I need to ask a strange question I just installed ssh module on the extreme switch but after a while, i can't get ssh working for outgoing connection Incoming ssh works just fine, but outgoing connection always failed with "port 22: Network...
