ExtremeSwitching (EXOS/Switch Engine) - Page 529 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

information about the forwarding performance of the X770

Where can I find information about the forwarding performance of the X770? The data sheet says up to 1904 Mpps. The product presentation from the partner web says 1440 Mpps. As far as I know it is based on the Broadcom Trident-II ASIC chipset which h...

Multicast communication on L2 vlan

I have two servers S1 and S2 connected to extreme BD switches Sw1 and Sw2 resp. We want to exchange the heartbeat from S1 to S2 via S1 - SW1 - SW2 - S2 over the multicast range. Both the servers are in same vlan. For accomplishing this if i disable ...

Switch Stacking Downtime?

I have 2 X440s in a stack at the moment, I am adding another x440 to the stack. If i break one of the stacking cables to connect to the 3rd switch, will the stack go down? I am trying to add this stack during production time and if the switches/stack...

DSCP ACL question. (Assign all traffic coming from a source to a DSCP(46) value)

We have a pair of Microsoft Surface Hubs we're testing out between our main office and our remote office in another part of the country. The offices are connected by a 10mbit MPLS circuit. Currently we use Skype for Business internally and have ass...

MMI (jsonrpc) feature returns 401 error after enabling RADIUS

Hey, I've started playing around with the jsonrpc interface. Everything works well when I set a password for 'admin'. But when I enable RADIUS for management amd try to login with a RADIUS user, I get a 401 error which as the documentation indica...

Top Kudoed Authors

User

Count

28

26

19

18

17

GTM-P2G8KFN