ExtremeSwitching (EXOS/Switch Engine) - Page 531 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Can anyone explain to me, the LAG sharing balancing hash algorithm XOR,CRC-16,CRC-32?

Hi all, I have a problem running a bert test through a LAG LACP between a Huawei Switch and our Extreme X460G2. The problem is that the Extreme is not making load balancing, I suppose because the two Exfo Machines that run Bert test use the same port...

information about the forwarding performance of the X770

Where can I find information about the forwarding performance of the X770? The data sheet says up to 1904 Mpps. The product presentation from the partner web says 1440 Mpps. As far as I know it is based on the Broadcom Trident-II ASIC chipset which h...

Multicast communication on L2 vlan

I have two servers S1 and S2 connected to extreme BD switches Sw1 and Sw2 resp. We want to exchange the heartbeat from S1 to S2 via S1 - SW1 - SW2 - S2 over the multicast range. Both the servers are in same vlan. For accomplishing this if i disable ...

Switch Stacking Downtime?

I have 2 X440s in a stack at the moment, I am adding another x440 to the stack. If i break one of the stacking cables to connect to the 3rd switch, will the stack go down? I am trying to add this stack during production time and if the switches/stack...

DSCP ACL question. (Assign all traffic coming from a source to a DSCP(46) value)

We have a pair of Microsoft Surface Hubs we're testing out between our main office and our remote office in another part of the country. The offices are connected by a 10mbit MPLS circuit. Currently we use Skype for Business internally and have ass...

Top Kudoed Authors

User

Count

28

26

20

20

17

GTM-P2G8KFN