ExtremeSwitching (EXOS/Switch Engine) - Page 565 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

ospf error log

what is the error log ? bor rtid 192.168.x.1 ipa 192.168.x.1 to state = INIT. 05/09/2016 03:54:54.89 Changing the state of neighbor rtid 192.168.x.1 ipa 0.0.0.0 to state = DOWN. 05/09/2016 03:54:54.46 Changing the state of neighbor rtid 192.168.x....

Allow DHCP and DNS through ACL for vLans

I have 4 vlans: Uplink, Mobile, Portal, NAT The Nat is the location of my DHCP and DNS server. I want to create ACL Policies that keep vlans Mobile, Protal, and Nat from talking to each other, but if I do, it breaks Portal and Mobile clients from g...

X440 Multiple Vlan Routing

configure vlan default delete ports allconfigure vr VR-Default delete ports 1-24 configure vr VR-Default add ports 1-24 configure vlan default delete ports 1-24 create vlan "amp" configure vlan amp tag 101 create vlan "control" configure vlan control...

Opposite of "save configuration as-script"

I am looking to reconfigure MANY switches "remotely". I have approximately 180 switches, mostly Summit x series, spread across more than 100 remote sites, so doing this remotely would be "Extreme"ly beneficial. (Pun intended). I would like to start w...

UPM script to send syslog keepalive messages every hour

We currently have our switches set up to send syslog messages to a centralized server which will send an alert out if a device hasn't sent a message in for over 4 hours. Some of our switches are pretty quiet and we wanted to know if it is possible t...

Top Kudoed Authors

User

Count

28

25

18

18

17

GTM-P2G8KFN