ExtremeSwitching (EXOS/Switch Engine) - Page 596 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

MSM-B: CPU 0: Kernel thread was stuck#####and issue with ospf

We recently upgraded bd8806 from 12.5 to 15.7, unfortunately first attempt to upgrade interrupted and second attempt was successful. After reboot the following error was noticed on the logs: 04/26/2016 09:57:29.77 MSM-B: CPU 0: Kernel thread was s...

ping health check XOS for PBR

Hi All, I have created a policy based routing policy to kind of simulate a "VR" on summit X440. We have a few transits connected to the Summit and these transits go to another device with VR's. Now we need to route specific subnets to specific tran...

Extreme x460 10g Modules show not supported on ver 15.7.1.4

Extreme 460 with 18 10 G SFP Ports and 8 copper ports. in SFP port when we intersert 10G Module mu lick does not comes u. When i insert 10g module in port 5 and 10 and interconnect lights power on. what can be the issue

how can i enable gui in X460 r X440

how can i enable GUI in X440 X460....i m creating vlan and give ip and enable web hhtp..but not open gui interface...? plz guide me...this is my code create vlan name configuration vlan name tag name configuration vlan name ipaddress 192.168.1.225 2...

How to do Port Specific VLAN + Routing

I need to configure routing between two VLANs with the same Port Specific VLAN, something like this: (SwitchA)10.1.1.1-------tag 100------10.1.1.2(SwitchC)192.168.1.2-----tag 100------192.168.1.1(SwitchB) How can I do this? Here is the options tha...

Top Kudoed Authors

User

Count

33

29

22

20

17

GTM-P2G8KFN