ExtremeSwitching (EXOS/Switch Engine) - Page 647 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Configuring RSTP connecting to Ruggedcom switches

Hi everyone, New to extreme switches coming from the Cisco side.... I'm trying to configure RSTP between my extreme switches and Ruggedcom RS900 switches. However, when I try to enable my stpd domain, I get the following error: Error: Incorrect ca...

Copy port configuration to another port?

Configuration Port ? which command can make same configuration Port same another port previously prepared?

XOS Authentication + Campus Mode + STP needed

we wants to use 802.1x and MAC Auth for authentication of the end-systems. Automatic VLAN configuration via RADIUS VSAs during authentication process is a very important additional value for us (XOS - Auth - Campus Mode). Finally we wants using Spann...

Tagged vmans, assigned to sharing, converts to untagged after removing port from sharing

Easy to reproduce: # enable sharing 33 grouping 33-35 lacp # create vman "v9" # configure vman v9 add ports 33 cep cvid 9 # show vman v9 | include 33 *33g: CVID 9 # configure sharing 33 delete ports 35 # show vman v9 | include 33 Untag: ...

Strip outer tag coming from IBM Flex Switch

I have an IBM chassis with 3 X240 servers with vmware ESXi 6, in the rear of the chassis I have 2 CN9043 switch with internal ports (servers side) and external ports to Extreme Summit switch with RJ45 ports, When the traffic go out from the host ...

Top Kudoed Authors

User

Count

33

29

22

20

17

GTM-P2G8KFN