ExtremeSwitching (EXOS/Switch Engine) - Page 672 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Not able to Unconfigure - Summit x450 24P

Greetings!!! I ran into a peculiar problem, where I am unable to unconfigure a switch that was part of an existing stack. Though, the switch was removed from the stack physically but it was not un-configured logically. 1. I tried un-configuring the...

source specific ssh from EXOS-15.3.1.4

Hi All, Is it possible to give source while doing ssh from Extreme switch to some external node. Like we give source using from in traceroute or ping. Thanks

Aggregation L3_L4 lacp Not working

Aggrigation L3_L4 lacp Not working when we confgure aggrigation . Load sharing is not happening seams some algo issue please suggest When we add 3 ports in aggregation traffic on master ports not happening

BUG: soft lockup - CPU#1 stuck

One X460G2-48t-10G4 switch with 15.6.1.4 took reboot due to below errors: 10/07/2015 05:39:01.88 Booting after System Failure. 10/07/2015 05:39:01.74 Changing to watchdog warm reset mode 10/07/2015 05:38:09.20 CPU 1: soft watchdog expiration warn...

resets without loss of power

Summit 670 resets when we have a power outage. The device has two power supplies. Both of which are plugged in to separate UPS's. The logging on the UPS shows that that voltage levels never dropped below 118vac and the load on the UPS was constant. ...

Top Kudoed Authors

User

Count

33

29

22

20

17

GTM-P2G8KFN