ExtremeSwitching (EXOS/Switch Engine) - Page 671 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

BUG: soft lockup - CPU#1 stuck

One X460G2-48t-10G4 switch with 15.6.1.4 took reboot due to below errors: 10/07/2015 05:39:01.88 Booting after System Failure. 10/07/2015 05:39:01.74 Changing to watchdog warm reset mode 10/07/2015 05:38:09.20 CPU 1: soft watchdog expiration warn...

resets without loss of power

Summit 670 resets when we have a power outage. The device has two power supplies. Both of which are plugged in to separate UPS's. The logging on the UPS shows that that voltage levels never dropped below 118vac and the load on the UPS was constant. ...

Should or can I configure ELRP on ports that have been setup with LACP?

Should I configure ELRP on ports that have been setup with LACP? I have 2 Summit switches with MLAG, and ports 48 on each switch are set for LACP. A server will have a connection to each port. Or will ELRP disable the port by default.

Upgrade Image

Hi, I have a switch X440-48P running on image ver 15.2.1.5 on both Primary and Secondary and the use image was on Primary. I have perform a firmware upgrade on the Secondary to image ver 15.3.1.4 and when the installation comple...

TACACS+ configuration

Hello, colleagues! Earlier was post about TACACS conf - https://community.extremenetworks.com/extreme/topics/tacacs_server_setting_admin_setting-f140e But now I have question. When I enable TACACS on switch, I can't login with TACACS account (is pre...

Top Kudoed Authors

User

Count

33

29

21

20

17

GTM-P2G8KFN