Hello Everybody,
Can anyone explain the 'max-burst-size' variable as it relates to egress rate limiting in the command below?
configure ports rate-limit egress [no-limit | [Kbps| Mbps | Gbps] {max-burst-size [Kb | Mb]}]
More specifically, if I'...
Is there any way to terminate a pseudo-wire on a VLAN with IP forwarding enabled?
Consider a scenario where a provider network is L2 back to a routing core - a classic scenario might be an EAPS ring around a number of edge switches, with a pair of c...
create vr "CAMPUS" type vpn-vrf vr "VR-Default"
configure vr "CAMPUS" add protocol ospf
Error: Protocol ospf cannot be configured on Virtual Router of type VPN VRF
I need it to be vpn-vrf for our MP-BGP network and I need ospf there, no in default o...
Hi,
i need to copy the config from a LAN attached Switch to a local switch to replace it later?
If i run the show conf to get the running config of the LAN attached switch in plaintext and paste it to the local(not LAN Attched device) it will not e...
