ExtremeSwitching (EXOS/Switch Engine) - Page 688 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Filter on multiple includes / excludes

Is there anyway to filter on multiple excludes / includes. As an example I have ACL logging enabled and I am trying to filter the log to exclude on certain ports, so as an example of some of the things I have tried that don't work are: show log | e...

How to configure VPLS L2VPN Pseudo Wire with MPLS

Hello, I'm needing some help setting up a layer 2 vpn between two X460-24t across a wan. I have all the necessary licensing and feature packs installed. The wan used static routing and is 3 hops away, also the routers in between do not participate in...

high CPU in X450 switch

Hi everybody we have X450 switch in our network is facing high CPU in the following process: 1- ./hal 2- ./FDB 3- bcmRX also when I ping to the IP of the switch I noted the bcmRX proc...

Private vlans config

Hello, I have a few questions about private vlans configuration. Firts of all topology: Router1 - with several VLAN and with vlan9 (IP: 192.168.9.1/24) Switch 1 (Extreme summit X440; XOS: 15.6.1.4) - which si directely connected to Router1 throw trun...

In show process command few prcoess showing not ready need license

CLEK-JCE-CHA-SW08.121 # show process Process Name Version Restart State Start Time ------------------------------------------------------------------------- bgp Not Started 0 No license Not Started can someone ...

Top Kudoed Authors

User

Count

32

29

20

20

17

GTM-P2G8KFN