I would like to set our K6 and our B5 switches up to use SSH Public/Private keys. When I increased the verbose settings on the client that I was connecting to the switch with, it reported that publickey was available for an authentication method. How...
Hi all,
I'm trying to read LLDP MIB from Summit X440-8t. As written in the user guide, this switch supports IEEE 802.1AB(LLDP-MIB). I can even show lldp neigbhors info correctly as shown below.
* X440-8t.4 # show lldp neighbors
Port Neighbor C...
Summit X460.
Scheme:
X460-1 (loopback vlan) <-> (ospf+mpls+ldp)<->X460-2 (loopback vlan) <-> (ospf+mpls+ldp) <-> cisco 7301
All work fine beetween X460-1 and X460-2; X460-2 and Cisco
All routes is present, protocols working, labels is running, BUT w...
Hi Folks,
I'm trying to setup a vlan between a pair of summit 200/48's. So far I've got the vlan configured on both ends, I've configured the ports on both ends, and I'm stuck on creating a 801.1q trunk.
Can anyone point me in the right direction?
