ExtremeSwitching (EXOS/Switch Engine) - Page 760 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

No associated STP port for STP Domain tag 1 (Rate-limited)

Hi, We are getting the below error on our X670-V switch. Port 1:33 is a sharing port "1:33 and 1:34" Port=1:33: No associated STP port for STP Domain tag 1 (Rate-limited) If we look at STP I can see 1:33, 1:33* 802.1D FORWARDING 18000 eRppad----...

Subvlan IPv6 not accessable

Hi, I have two switches connected by a grouping of 3 ports across a vlan called "Dedicated" tagged 200 on each side. On one side is an X450 which is connected to outside networks and has BGP. The other side is an X440 which has has the "Dedicated" v...

Subvlan not accessible across switches

Hi, I have two switches connect by a 3 port grouping. On each side, there is a vlan called Dedicated and the group is tagged 200 on each side. One switch is an X450a-48t, this is connected to the outside world and has other networks etc. connected ...

Compatibility between EAPS and G.8032 ERPS

hi Experts, Can EAPS interoperable with G.8032 ERPS? http://extrcdn.extremenetworks.com/wp-content/uploads/2014/04/Layer_2_Protocols.pdf From P.68, it mentions: • Basic interoperability with EAPS with G.8032 acting as an access ring. Flush notific...

redundancy between servers which are in different location

I need some help about configuring redundancy on extreme switch. We have three locations and in every location we have some virtual server which are used for same purpose. Now I want to put these virtual servers in a same vlan and want to use them as...

Top Kudoed Authors

User

Count

32

29

20

20

17

GTM-P2G8KFN