ExtremeSwitching (EXOS/Switch Engine) - Page 761 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Wake on LAN accross multiple routers

Create Date: Dec 5 2013 3:45PM I have a server that needs to wake devices. I saw the "ipforwarding broadcast " command, but the VLANs the target devices are in are spread across an enterprise network and do not exist on the same router. I need m...

Automatic config backup / L2Edge license

Hello, colleagues! Is there some ideas how can I automatically backup configurations from L2 switches with L2 Edge license. UPM work from Edge license. Thank you!

| include regexp usage

Hi everybody. I have a problem with regexp usage in "include" command. I'd like to show specific lines in FDB which contains something like "v\d{4}". Letter "v" and four-digit number.

Doubts LACP swicths X670V-48t

hi, I have 2 swicths X670v-48t with 2 stacks of 40 G each. Firmware version 15.6.1b.4. Only I have configured vlan "Default" on all ports. I created a dynamic LACP "enable sharing 1: 1 grouping 1: 1, 2: 1 algorithm-based L2 address lacp". I created ...

Exos server load balancing

How can I balance traffic between some http servers using extreme networks switches? We use cisco IP SLA with static routes now, but I found no solutions with extreme networks switches. Does anyone know if there is "Server Load Balancing" functional...

Top Kudoed Authors

User

Count

33

29

21

20

17

GTM-P2G8KFN